top of page
Sony
GigE
XCG-5005
​

  • 2/3 type Progressive Scan IT CCD

  • 8/10/12 bits/pixel

  • GigE Vision Compliant (Ver 1.20)

  • 2448 x 2048 pixels

  • 15 fps

  • High Sensitivity - 2000 lux @ F8 (o dB)

  • Compact & Lightweight: 44 x 33 x 67.5 mm (1 3/4 x 1 5/16 x 2 3/4 inches), 145g (less than 5 3/4 oz)

  • Partial Scanning & Binning Functions

  • High Shock and Vibration Resistance

XCG-CG160
​

  • Sony IMX273 1.6MP

  • 75 fps

  • Compact size

  • GigE Vision 2.0/1.2

  • Gigabit Ethernet with PoE

  • IEEE1588 (PTP) compliant

  • Area Gain

  • Advanced Image Processing

  • Defect Pixel Correction

  • Shading Correction

XCG-CG240​

​

  • Sony IMX249 2.4MP

  • 41 fps

  • Compact cubic size

  • GigE Vision 2.0/1.2

  • Gigabit Ethernet with PoE

  • IEEE1588 compliant

  • Area Gain

  • Advanced Image Processing

  • Defect Pixel Correction

  • Shading Correction

XCG-CG510
​

  • Sony IMX264 5.1MP

  • 23fps

  • Compact cubic size

  • GigE Vision 2.0/1.2

  • Gigabit Ethernet with PoE

  • IEEE1588 compliant

  • Area Gain

  • Advanced Image Processing

  • Defect Pixel Correction

  • Shading Correction

  • Trigger Mode

  • Single ROI

XCG-CP510
​

  • Sony IMX250MZR 5.1MP

  • 23fps

  • Compact cubic size

  • GigE Vision 2.0/1.2

  • Gigabit Ethernet with PoE

  • IEEE1588 compliant

  • Area Gain

  • Advanced Image Processing

  • Defect Pixel Correction

  • Shading Correction

  • Trigger Mode

  • Single ROI

XCG-H280E
​

  • 2/3-type Progressive Scan EXview HADII CCD

  • GigE Vision Ver 1.2 compliant Interface

  • 32 fps Full-HD (1920 x 1080) frame rate

  • Variety of trigger modes

  • Power on LED settings

  • Sony Image Filter Dedicated Driver

  • XML File (GeniCam Compliance)

  • Bulk Trigger Mode and Sequential Trigger Mode

  • High Shock and Vibration Resistance

  • Connectors: RJ-45 (locking - 20mm pitch), Power/Gnd connector, I/O connector block (trigger-in (2), GPI (2), GPO (2), GND)

  • Compact & LIghtweight: 50 x 50 x 57.5 mm/200g

XCG-SX97E
​

  • Sony 2/3 Progressive Scan IT CCD

  • GigE Vision Compliant (Ver 1.0)

  • Up to 16 fps

  • Variety of Trigger Modes

  • Power on LED Settings

  • XML File (GenICam Compliance)

  • Two connectors: RJ-45 (locking-20mm pitch), EIAJ-12 pin (power, trigger-in, strobe-out, isolated digital I/O)

  • Compact and Lightweight

  • High Shock and Vibration Resistance

XCG-U100
​

  • Sony 1/1.8-type progressive scan IT CCD

  • GigE Vision Compliant (Ver 1.0)

  • Up to 15 fps

  • Variety of Trigger Modes

  • Power on LED Settings

  • XML File (GenICam Compatible)

  • Two connectors: RJ-45 (locking-20mm pitch)

  • EIAJ-12 pin (power, trigger-in, strobe-out, isolated digital I/O)

  • High Shock and Vibration Resistance

  • Compact and Lightweight

XCG-V60E
​

  • 1/3 type Progressive Scan IT CCD

  • 1000BASE-T (GigE Vision Compatible)

  • 90 fps, VGA Resolution

  • Variety of Trigger Modes

  • Power on LED Settings

  • Sony Image Filter Dedicated Driver

  • XML File (GenICam Compliance)

  • Two connectors: RJ-45 (locking-20mm pitch), EIAJ-12 pin (power, trigger-in, strobe-out, isolated digital I/O)

  • Bulk Trigger Mode and Sequential Trigger Mode

  • High Shock and Vibration Resistance

  • Compact and Lightweight

Camera Link
XCL-5000
​

  • 2/3 type Progressive Scan CCD image sensor

  • Approximately 5 Mega pixel resolution

  • 2,456 x 2,058 effective picture elements

  • 2448 x 2050 pixels

  • 15 full frames/sec

  • High Sensitivity - 400 lux @ F5.6

  • Compact & Lightweight: 44 (W) x 44 (H) x 57.5 (D) / 150g

  • External Trigger Shutter: 2 to 1/10,000 sec

  • Synchronization Signal: Internal/External (HD/VD)

  • Partial Scanning & Binning Functions

XCL-5005
​

  • 2/3 type Progressive Scan CCD image sensor

  • Approximately 5 mega pixel resolution

  • Auto-selectable power from EIAJ or PoCL connector

  • 2,456 x 2,058 effective picture elements

  • 2448 x 2050 pixels

  • 15 full frames/sec

  • High Sensitivity - 400 lux @ F5.6

  • Compact & Lightweight: 44 (W) x 44 (H) x 57.5 (D) / 150g

  • External Trigger Shutter: 2 to 1/10,000 sec

  • Synchronization Signal: Internal/External (HD/VD)

  • Partial Scanning & Binning Functions

  • High Shock and Vibration Resistance

XCL-C130
​

  • Shading Correction: Minimizes uneven image intensity caused by lighting cond

  • Defect Correction: Automatically minimizes defective pixels directly inside the camera.

  • Temperature readout: Eliminates the need for a separate sensor and simplifies system configuration.

  • Memory Channel: Up to 16 sets of camera parameters can be stored in addition to the factory default settings.

  • Bulk Trigger Modes: Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.

  • Sequential Trigger Mode: Allows the camera to capture a single image using successive setups stored in the memory channel.

XCL-C280
​

  • Near-Infrared Sensitivity: Utilizing Sony's EXview HAD CCD II technology, the XCL-C280 camera captures clear images in NIR wavelengths.

  • Shading Correction: Minimizes uneven image intensity caused by lighting conditions.

  • Defect Correction: Automatically minimizes defective pixels directly inside the camera.

  • Temperature readout: Eliminates the need for a separate sensor and simplifies system configuration

  • Memory Channel: Up to 16 sets of camera parameters can be stored in addition to the factory default settings.

  • Bulk Trigger Modes: Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.

XCL-C500
​

  • Shading Correction: Minimizes uneven image intensity caused by lighting conditions

  • Near-Infrared Sensitivity: Utilizing Sony's EXview HAD CCD II technology, the XCL-C280 camera captures clear images in NIR wavelengths.

  • Bulk Trigger Modes: Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.

  • Memory Channel: Up to 16 sets of camera parameters can be stored in addition to the factory default settings.

  • Defect Correction: Automatically minimizes defective pixels directly inside the camera.

  • Temperature readout: Eliminates the need for a separate sensor and simplifies system configuration..

  • Sequential Trigger Mode: Allows the camera to capture a single image using successive setups stored in the memory channel.

XCL-CG510
​

  • Unique Image Processing

  • Area Gain

  • Defect Correction

  • Shading Correction

  • 3x3 Filter

  • When combined with the use of a high speed Camera Link interface, the XCG-CG510 is perfectly suited for use within ITS, factory automation, food and beverage inspection and pharmaceutical applications.

  • High Frame Rate Image Transfer

  • Shading Correction

  • Defect Correction

  • Temperature Readout

  • Memory Channel (User Set)

  • Bulk Trigger Mode & Sequential Trigger Mode

  • Look-up Table (LUT)

  • Industrial Design

XCL-S600
​

  • Near-Infrared Sensitivity: Enables the camera to capture images in NIR (near-infrared) wavelengths. When used with an infrared strobe, the cameras produce outstanding picture quality in low light situations.

  • Shading Correction: Minimizes uneven image intensity caused by lighting conditions.

  • Defect Correction: Automatically minimizes defective pixels directly inside the camera.

  • Temperature readout: Eliminates the need for a separate sensor and simplifies system configuration.

  • Memory Channel: Up to 16 sets of camera parameters can be stored in addition to the factory default settings.

  • Bulk Trigger Modes: Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.

  • Sequential Trigger Mode: Allows the camera to capture a single image using successive setups stored in the memory channel.

XCL-S900
​

  • Near-Infrared Sensitivity: Enables the camera to capture images in NIR (near-infrared) wavelengths. When used with an infrared strobe, the cameras produce outstanding picture quality in low light situations.

  • Shading Correction: Minimizes uneven image intensity caused by lighting conditions.

  • Defect Correction: Automatically minimizes defective pixels directly inside the camera.

  • Temperature readout: Eliminates the need for a separate sensor and simplifies system configuration.

  • Memory Channel: Up to 16 sets of camera parameters can be stored in addition to the factory default settings.

  • Bulk Trigger Modes: Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.

  • Sequential Trigger Mode: Allows the camera to capture a single image using successive setups stored in the memory channel.

XCL-SC1240
​

  • XCL-SG1240 & XCL-SG1240C

  • Shading Correction

  • Burst Trigger

  • Trigger Range Limitation

  • Defect Correction

  • 3x3 Fitter

  • Binning (XCL-SG1240)

XCL-SG510
​

  • Unique Image Processing

  • High Frame Rate Image Transfer

  • Shading Correction

  • Defect Correction

  • Temperature Readout

  • Memory Channel (User Set)

  • Bulk Trigger Mode & Sequential Trigger Mode

  • Look-up Table (LUT)

  • Industrial Design

XCL-U100
​

  • UXGA High Resolution Image Capture at 15 fps

  • 1/1.8 type progressive scan CCD with square pixels

  • High Sensitivity: 400 lux @ F5.6

  • Conforms to Camera Link Standard

  • Ultra-compact and lightweight: 29 (w) x 29 (H) x 30 (D) mm/ 55 g

  • DSP Hardware processing function: Digital Clamp/Pedestal, Digital Gain, 3x3 Filter, Gamma Correction, Binarization

  • C-Mount

  • High shock and vibration resistance

XCL-U1000
​

  • High-resolution image capture - UXGA image (1,600 x 1,200 pixels) captures video at 15 fps

  • 1/1.8 type progressive scan CCD with square pixels

  • Effective picture elements: 1,600 (H) x 1,200 (V)

XCL-V500
​

  • High Rate Scanning - VGA image (640 x 480 pixels) captures video at 60 fps

  • 1/3 type progressive scan CCD with square pixels

  • Effective pixel elements - 1,024 (H) x 768 (V)

  • High sensitivity: 400 lux @ F5.6

XCL-X700
​

  • High Rate Scanning - XGA image (1,024 x 768 pixels) captures video at 30 fps

  • 1/3 type progressive scan CCD with square pixels

  • Effective pixel elements - 1,024 (H) x 768 (V)

  • High sensitivity: 400 lux @ F5.6

USB 3.0
XCU-CG160
​

  • Sony IMX273 1.6MP

  • Over 100 fps

  • Compact size

  • USB3.0 Vision 1.0.1

  • Area Gain

  • Advanced Image Processing

  • Defect Pixel Correction

  • Shading Correction

bottom of page